Publicité
Installation
Step 1
Align foot onto side panel and secure with bolt using
Allen wrench provided. Repeat on the opposite side.
Depress both buttons on the lower corner of one of
Step 2
the side panels (2a), then attach the lower Versa-Lock
Hinge. Slide until it clicks into place (2b). Repeat on
the lower corner of the opposite side panel.
Align center panel with lower Versa-Lock Hinges.
Step 3
Depress both buttons on one side of the center panel
and click the center panel into place. Repeat on the
opposite side.
Secure the center panel by sliding the upper Versa-Lock
Step 4
Hinges onto the center and side panels. Depress the
buttons and click the upper Versa-Lock Hinge into place.
Repeat on the opposite side. Be sure all lock buttons are
clicked securely into place.
NOTE: Exposed screws on wood
panels should be facing down
underneath the gate.
2a
2b
click!
Page 3
Publicité
