Publicité
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the
lag screws
A1
only until they are pulled firmly against the wall plate
(DO NOT overtighten). Do not use a drill; only use a socket wrench.
• Use wall anchors
• Mount the wall plate directly on the concrete surface.
• Minimum concrete block size: 8" x 8" x 16" (203 x 203 x 406mm)
1
Option B
For Concrete and Concrete Block Wall Installation
Tape Measure
A2
for this mounting option.
05
≥8" (203mm)
Hammer
Level
11
35mm
1 3/8"
35mm
1 3/8"
1 3/8"
35mm
35mm
3/8" (10mm)
Concrete Drill Bit
Wall Anchor
Mark 4 Hole Positions
2 3/8"
60mm
60mm
1/2" (13mm)
Socket Wrench
A2
Publicité
