Lorex Baby BB1811AC1 Guide De Démarrage Rapide

All manuals and user guides at all-guides.com
ADD-ON CAMERA
BB1811AC1
QUICK START GUIDE
What's Included
Getting Started
1
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Pairing the Camera with Your Monitor
1
2
3
4
1-20022013
x1 x2 x1 x2
Connect the power adapter to the
Slide the power switch to ON.
2
camera and then to a power outlet.
Place the camera and monitor next to each other. Make sure the
monitor and the camera are turned on.
Press on the monitor to open the on-screen menu.
Use the arrow keys on the monitor ( ) until the
following display can be seen then press .
Use the arrow keys on the monitor ( ) to select the channel
you would like to pair the camera to.
NOTE: If a camera is already connected to the channel you
selected, the new camera will replace the existing camera.
www.lorexbaby.com
x2
NOTE: This camera is wall mountable.
Please see the User's Guide provided with
BB1811 for details.
Use the included cable clips to help keep
TIP
power cords out of reach of your child.
Cable clips
Press the button on the monitor to begin pairing.
5
The LINK LED will start flashing.
6
Press the PAIR button on the back of the camera.
PAIR button
Images from the camera are immediately shown on the
monitor once the camera is successfully paired.
NOTE: Immediately move the camera away from the monitor
to avoid speaker feedback.
7
Press twice to exit menu.
NOTE:
If pairing was unsuccessful, repeat the pairing process
described above starting with step 2.
BB1811AC1_Quick Start Guide_R1
Page 1