Measurement and instrumentation
EVOLIO F15 ± / 0.4 A power supply
Ref :
281 002
ENGLISH
All manuals and user guides at all-guides.com
3 Precautions for use
•
Avoid using the power supply in direct sunlight or close to a heat
source.
•
Never block the ventilation vents when the power supply is
operating.
•
If this device is used in a manner not mentioned in these
instructions, the safety ensured by the device may be compromised.
4 Technical characteristics
•
Voltage:
•
Outputs:
•
Maximum current:
•
Stabilisation:
•
Residual ripple:
•
Power supply:
•
Power consumed
from the mains:
•
Protection:
•
Dimensions:
•
Mass:
•
Guarantee:
This device complies with:
The low Voltage directive 73/23/CEE; applied standard: EN 61010-1
The CEM 89/336/CEE directive; applied standards: EN 50081-1 and
EN50082-1
4.1 Environmental conditions for use of the
device
•
For indoor use
•
Altitude less than 2000 meters
•
Operating temperature from 15°C to 40°C
•
Maximum relative humidity of 80% up to 31°C and 50% up to 40°C
•
Mains supply variations of +/-10%
•
Installation category II, pollution level 2
6
- 15, 0, + 15 V fixed, DC
Safety sockets ø 4 mm
0.4 A at each output
1 %
Less than 10 mV
230 V ± 10 %, 50-60 Hz
30 VA
Primary: fuse calibrated on I.C.
Secondary: electronic
115 x 140 x 80 mm
950 g
2 years