Kask PRIMERO Serie Mode D'emploi

FIG. 1
OK NO
FIG. 2
FIG. 3
FIG. 5 FIG. 6
FIG. 7
NOMENCLATURE
1 2 3
3
5
14
13
12
11
10
NO
SAFETY HELMET FOR INDUSTRIAL USE
FIG. 4a 4b
KASK S.p.A.
24060 Chiuduno, BG
Via Firenze, 5 - Italy
t. +39 035 4427497
info@kask.com
www.kask.com
EXPLANATORY MARKING DIAGRAM
EXPLANATORY MARKING DIAGRAM
FAC-SIMILE LABELLING
4
SAFETY HELMET FOR INDUSTRIAL USE. For adequate protection this helmet has to t or to be adjusted to
the size of the user's head. The helmet is made to absorb the energy of a blow by partial destruction or damage,
5 and even though such damage may not be readily apparent, any helmet subjected to severe impact should be
replaced. The attention of the user is also drawn to the damage of modifying or removing any of the original
component parts of the helmet, other than as recommended by the helmet manufacturer. Helmets should
6
not be adapted for the purpose of tting attachments in any way not recommended by the helmet
manufacturer. Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with
instructions from the helmet manufacturer. For cleaning, maintenance or disinfection, use only substances
that have no adverse effect on the helmet and are not known to be likely to have any adverse effect upon
the wearer, when applied in accordance with the manufacturer's instructions and information.
7
DATE OF MANUFACTURE
8
9
Size:
USE AND CARE BOOKLET
PRIMERO / PRIMERO AIR
CSA Z94.1-15
TYPE 1 / CLASS C/E
1 MANUFACTURER 5 HELMET WEIGHT
2 MODEL NAME 6 SIZE IN CM
3 REFERENCE TO LEGISLATION
4 DATE OF MANUFACTURE 7 IDENTIFICATION NUMBER
ADDITIONAL REQUIREMENTS
FAC-SIMILE LABELLING
Manufacturer: KASK S.p.A.
Weight: 0.95 lb - 430 g
Via Firenze 5 - 24060 Chiuduno BG - Italy
1 KASK S.p.A. 5 1,01lb - 460 g
Model: PRIMERO Size: Adjustable
2 ZENITH X2 6 Adjustable
Standard: CSA Z94.1-15 6 1/2 - 7 7/8
3 ANSI Z89.1-2014 6 1/2 - 7 7/8
Type I - Class E 52 - 63cm
Type I, Type II Class E 52 - 63 cm
Date: impressed on the shell SN: 22.1234567.1234
4 impressed on the shell Complies with requirements of the European 7 22.0000.0001
Standard EN12492:2012 - Shock energy absorption
Complies with requirements of the European Standard
capacity - Clauses 4.2.1.2 (front), 4.2.1.3 (lateral),
EN12492:2012 - Shock energy absorption capacity -
4.2.1.4 (rear); Penetration - 4.2.2 - Retention system
Clauses 4.2.1.2 (front), 4.2.1.3 (lateral), 4.2.1.4 (rear);
strength - 4.2.3; Retention system effectiveness (Roll
Penetration - 4.2.2; Retention system strength - 4.2.3;
off) - 4.2.4. www.kask.com
Retention system effectiveness (Roll off) - 4.2.4.
www.kask.com
Manufacturer: KASK S.p.A.
Weight: 0.95 lb - 430 g
Via Firenze 5 - 24060 Chiuduno BG - Italy
Model: PRIMERO AIR
Size: Adjustable
Standard: CSA Z94.1-15
6 1/2 - 7 7/8
Type I - Class C 52 - 63cm
Date: impressed on the shell
SN: 22.1234567.1234
Complies with requirements of the European
Standard EN12492:2012 - Shock energy absorption
capacity - Clauses 4.2.1.2 (front), 4.2.1.3 (lateral),
4.2.1.4 (rear); Penetration - 4.2.2 - Retention system
strength - 4.2.3; Retention system effectiveness (Roll
off) - 4.2.4. www.kask.com
6 - 7
1/2 7/8
PRIMERO
ADJUSTABLE
52 - 63 cm