Publicité
4.
Dismantle the cover of the door and mount it on
the other side. Lift the door off the hinge and
place it on a soft surface to avoid scratches.
5.
First dismantle both adjusting legs. Then dismantle
the hinge bracket on the bottom right-hand side
of the appliance. Unscrew the hinge pin from
the bracket. Turn the bracket over and screw the
hinge pin back on.
6.
Install the hinge bracket on the other side of the device. Then replace the two adjusting legs.
7.
Remount the door. Make sure the door is level
horizontally as well as vertically so that the gaskets
close properly on all sides before tightening the top
hinge.
30
Publicité
