Publicité
Assembly
CAUTION: Two people are recommended for assembly.
□ Hold the Hanging Bracket (B) in the desired location on the wall. Ensure the bracket is level and draw a line along the length of
the bracket.
□
Locate the walls studs and mark their location on the line drawn for the Hanging Bracket (B).
□ Align the holes in the Hanging Bracket with the wall studs and mark the location on the wall.
□ Pre-drill the holes with a 5/32in. drill bit to help prevent splitting the wall studs.
□ Use the 2 screws (AA) to mount the Hanging Bracket (B) to the wall, Tighten with a 10mm socket or wrench. DO NOT over tighten.
□ Hang the Charging Station on hanging bracket, and ensure it's properly seated and secured.
□ Affix the 4 stickers on the EVA pad's back.
□ Peel off the paper back from the adhesive squares on the EVA Pads (BB), and affix inside the tool holders to help
protect power tools.
B
AA
BB
To ensure safety, this Product must be
WARNING:
properly secured to at least 2 wall studs using the
included hardware.Do NOT use drywall anchors to
secure Product to the wall.
4
Publicité
