Publicité
6. Checking the LED Indicators
When the Access Point is connected to power, LEDs indicate activity as follows:
7. Installing Software
The following applications and documents are included on the 3Com CD-ROM:
•
Wireless Infrastructure Device Manager
•
User manual
•
This Quick Start Guide
You need to install the Wireless Infrastructure Device Manager software (WIDMan) on your
computer to discover and configure the Access Point.
1
Turn on your computer.
2
Insert the 3Com Installation CD into the CD-ROM drive.
The CD menu appears. If it does not appear, you can start the Setup menu from the
Windows Start menu. For example: Start > Run > d:setup.exe.
3
On the menu, click Utilities.
All manuals and user guides at all-guides.com
LED
Color
Power Green
Off
11a
Green
Off
11b/g
Green
Off
100
Green
Off
10
Green
Off
9
Indicates
Power On
Power Off
Indicates that wireless networking is
enabled. If the LED is flashing, the
wireless link is OK and data is being
transmitted or received.
The radio is off
Indicates that wireless networking is
enabled. If the LED is flashing, the
wireless link is OK and data is being
transmitted or received.
The radio is off
Indicates a 100Base-T network is
detected at the Ethernet port. If the
LED is flashing, the link is OK and
data is being transmitted or received.
No link
Indicates a 10Base-T network is
detected at the Ethernet port. If the
LED is flashing, the link is OK and
data is being transmitted or received.
No link
Publicité
