Publicité
USB-C 30W WALL CHARGER
Ref: KO047057
CHARACTERISTICS
•
Input voltage: 100-240V
50/60Hz 1A
•
Output voltage: 5.0V
3A, 9.0V
•
Power: 30W max
PACKAGING CONTENT
•
A USB-C wall charger
•
A user manual
WARNINGS & SAFETY INSTRUCTIONS
•
Do not short-circuit.
•
Make sure that the correct voltage is used, as prolonged excessive voltage may damage your device.
•
Do not attempt to use this power supply with any device requiring more than the rated output power.
•
Do not attempt to open the charger.
•
Remove this charger from the mains when not in use.
•
Always switch off your device before connecting/disconnecting it from the charger.
•
The power socket must be installed near the equipment and must be easily accessible.
It is also recommended to :
•
Charge your electrical or electronic devices outside of wet rooms.
•
Do not use a plugged-in electrical device, including a waterproof and water-resistant telephone, in the
bathtub or shower.
•
Do not handle a plugged-in electrical device with wet hands or feet, or with feet in water.
Guarantee
The products are guaranteed not to fail due to manufacturing defects. This warranty does not cover defects due to misuse or
normal wear and tear, so please keep your invoice attached to this guide.
3A, 12.0V
2.5A, 15.0V
2A, 20.0V
Double-insulated equipment. This symbol means that this appliance has reinforced insulation with no accessible metal
parts. The plugs of class 2 equipment do not have earth pins.
This symbol means that this device is for indoor use only.
Average active Efficiency > 86,62%
This socket must be installed close to the equipment and must be easily accessible.
DC (Direct current) symbol.
PRODUCT USE
1.5A
This charger is specially designed for safe and convenient use of your digital devices.
Short circuit and overload protection.
CHARGING YOUR DEVICE
Important:
First check the compatibility of the voltage with your device.
1. Before use, check the input voltage of your device and the output voltage of this charger, if they can match. Make
sure that the total load does not exceed the rated output current of this charger.
2. Connect your device and the USB-C port of this adapter via a charging cable.
3. Plug this charger into a wall outlet (100-240V
4. This charger will detect the best charging mode and start charging your device automatically.
5. Your digital device should then indicate the charging mode.
6. Unplug your digital device when not in use.
7. Unplug this charger from the wall socket when not in use.
Directive 2012 / 19 / EU
Correct disposal of this produt
Electronic waste should not be thrown away with household waste. Please recycle them to your authorized agency and check the recycling advice with the
relevant local authorities.
SRDi declares that the product «USB-C 30W wall charger» is in conformity with directives 2014/30/EU & 2014/35/EU & 2011/65/EU.
The full EU Declaration of Conformity is available on our KeyOuest website at: www.keyouest.fr
2024/05V02/MKG
AC (Alternating current) symbol.
). The built-in switch automatically adjusts the voltage.
SRDi - 85430 La Boissière des Landes FRANCE
Publicité
