Publicité
- The ActivHub
RF has several modes of operation (12),
TM
All manuals and user guides at all-guides.com
selectable with the wheel. Please select position 8 to use
the EDGE
VR properly.
TM
Auto test mode : position 0
Please note that positions 1 and 2 are not meant to be
used in the ActivHub
RF50.
TM
- When the configuration is ready, please stand in front
of the screen and press the On / Off button on your
glasses.
- The glasses will automatically search the
synchronization signal.
Once the glasses are synchronized, the LCD lenses will
flash ultra-fast. Then you can watch your 3D content
4. USING YOUR EDGE
VR
TM
4.1 ON/OFF and Auto OFF
ON :
Turn the glasses ON with just a short press of the ON/OFF
button. When switched ON, the lenses will alternately
flash one time (left and right) to indicate to the user that
the glasses are powered ON.
OFF :
Turning the glasses OFF is possible by holding down the
ON/OFF the button.
The glasses will turn off automatically in the following
cases:
- Loss of IR/RF synchronization after 10 minutes.
11
Publicité
