Publicité
Hanging Cabinets on Wall
Parts Needed.
Planning the general position of cabinets.
2
Step A. Determine the height off the ground you would like the base and locker cabinets to be
and make a horizontal mark at this position.
Step B. Next mark the width of each cabinet in the intended position and ensure the wall
studs fall at least 1.25" in from the edge of the cabinets. This will ensure there is no interference
with the edges of the cabinet and the wall bracket when hanging the cabinet on the wall.
Note: Ensure there are two studs for the first cabinet in the desired layout to be mounted. Due
to the spacing of the wall studs it is possible that some base or wall cabinets will only have one
stud they will attach to; This is acceptable as long as the cabinet is bolted to another securely
mounted cabinet.
A
B
A
16
Height from Floor
Width of Cabinets
Wall Stud
Cabinet Width
Cabinet Layout
Use stud finder to locate the studs
1
and mark the wall with a pencil.
Wall
studs
must fall
1.25" or
more
from
sides of
cabinet
B
Floor
Wall
studs
must fall
1.25" or
more
from
sides of
cabinet
Publicité
