Important - Westinghouse WES41-700S Manuel D'utilisation

2) Remove all plastic wraps.
Leg and foot massager linkage pole installation
For the leg massager to be able to incline and recline, you must install the leg massager linkage pole
correctly.
a) Take off the linkage pole mechanism from inside the seat.
b) Align both holes of the mechanisms and insert the locking pin.
Leg and foot massager installation
a) Place the leg and foot massager close to the front of the massage chair. Connect the air tube of the
chair into the leg and foot massager. Connect the square power cords together. Make sure they are
secured and tight.
IMPORTANT: Avoid bending the air tube.