Publicité
locked (you will hear a clicking sound). Place the mattress in the cot with the soft side up. Attach
the mattress to the base.
Moving the crib - Figure 9: To move the crib, lift the back of the bed, then move it to the desired
location using the factory-fitted castors to both legs. The two legs of the crib are equipped with
a braking device (stoppers) that stop the movement of the crib and keep it firmly locked. To lock
the two wheels, press down the thumbwheel as shown in Figure 9. To release the brake, lift it
up.
B. FOLDING THE CRIB – FIGURES 10-16: - Remove the mattress. Rotate the handle of the locking
mechanism, located on the bottom of the crib, 90 degrees (see Figure 12). Then pull it up
MAXIMUM to fully release the lock. ATTENTION! Do not pull up on the handle of the locking
mechanism before you have it at 90 degrees. ATTENTION! Failure to pull the mechanism to its
highest position may damage the locking of the sides. Warranty conditions do not include
damage caused by improper use of the product. Find the buttons in the middle of each side.
Press them and fold all sides of the crib. Take the mattress and wrap it around it. Close the
package by wrapping the velcro straps around the mattress. Put the cot in the carrying case and
fasten the zipper.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean the plastic or metal parts of the product with a soft cotton cloth or sponge moistened with
water. For cleaning the changing pad follow the instructions on the label. Do not use bleach,
aggressive detergents, or abrasive products to clean the product. All textile parts and fabrics
should be washed only by hand, following the instructions on the label (to be cleaned with a
damp cloth and a mild detergent). After cleaning, allow the cot to dry well before using it. Do
not fold or remove the cot before it is completely dry. Do not expose the product to direct
sunlight for extended periods of time and to extreme temperatures that may change colour and
damage exposed parts. Do not place objects in or on the product to avoid damaging the
structure and / or upholstery. Store the product in a clean and dry place.
Manufactured for Cangaroo in PRC,
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.cangaroo-bg.com
17
Publicité
