Electric Connection - Smeg KITFD050 Manuel D'utilisation

After correctly installing the top parts (1, 2, 3, 4, 6, 7, 8, 9) position the body of the disposer and tighten the
connection ring nut, rotating it all the way until reaching the mechanical travel limit of the LOCK position
indicated in the figure:
Position the body of the food waste disposer so that the electrical rearm device is facing outward and
always easily reachable.
9.
Every intervention on the electric parts must be carried out by a qualified professional in accordance with
applicable rules and regulations on injury prevention.
The user must prepare:
- A correctly proportioned electric supply line, equipped with an isolating device complete with power surge
protection (ld = 0.03 A) and indirect contacts.
-A line for the grounding connection
Characteristics of the electric energy source:
- voltage: 220 – 240 V ± 10% L+N+T
- frequency: 50 – 60 Hz
- maximum powet: 1.5 Kw
IT IS FORBIDDEN TO USE THE FOODWASTE DISPOSER
In case the electrical cable is connected, the wall socket or the socket is damaged, not correctly
ATTENTION
mounted or if they present some anomalies, the replacement of damaged electrical cables has
to be performed by the manufacturer or skilled / qualified team in order to avoid dangers.

ELECTRIC CONNECTION

EN
22