Publicité
28 Port Gigabit Extended Range PoE Switch
28 Port Gigabit Extended Range PoE Switch
AI DIP
Switch
O N D I P
QoS
1 2 3 4
0E-24PRJ45E
VLAN
O N D I P
QoS
VLAN
1 2 3 4
AI DIP Switch
INPUT 100 240VAC
:
-
Power Input with On/Off Power Switch
and 10Amp Fuse
Installation Steps
Please check the following items before installation. If any items are missing,
please contact ADI or the installing company.
28 Port Gigabit Extended Range PoE Switch
Rack mount kit
ACpowercable
Usermanual
Please follow the below installation steps:
1. Ensure that all devices are powered off before installation.
NOTE: Installing with the power on will damage the equipment.
2. Use network cable to connect PoE IP cameras or other devices to ports 1-24 of the PoE Switch.
3. Use network cable to connect equipment to the uplink port and NVR or computer.
4. Connect the AC power cable to the unit.
5. Confirm that the installation is correct, the equipment is in good condition and the connection
is stable; then connect power to the system.
6. Ensure the PoE Switch has power and works properly.
28 Port Gigabit Extended Range PoE Switch
PoE Ethernet Ports
Uplink
Gigabit SFP Ports
Gigabit Ethernet Ports
1 pc
1 pc
1 pc
1 pc
Publicité
