Publicité
USB NANO-TRANSCEIVER
Your mouse and keyboard set include a single, small USB nano-transceiver that allows
them to communicate with your computer (PC or Mac). This transceiver comes stored
inside the body of the mouse and is accessible from its underside (see diagram). This is
where you'll find it when you take it out of the box for the first time and where you can
store it if traveling with the set in the future. The set is already paired with the transceiver
at the factory so it's not necessary for you to do any manual pairing before the first use.
1. Remove the USB transceiver from the mouse.
2. Place in your computer's USB-A (full-sized USB) port.
PAIRING
t3
USB Port
Your mouse and keyboard already come paired
from the factory. However, if either the mouse
or keyboard stop working with your computer,
the first thing to check is the battery in each
device. If replacing the battery doesn't help, it
may be necessary to pair your mouse and/or keyboard with the transceiver manually.
MOUSE PAIRING
1. Remove the battery from the mouse, if installed
2. Put the transceiver into the PC's USB port.
3. Install the battery into the mouse (see instructions above)
4. Press and hold the right button while simultaneously holding down the scroll wheel
button.
-3-
I
_J
0
,z
w
U)
U)
Publicité
