Publicité
Caution: When the two inputs are used at the same time, please make sure to use the same type of
solar panel and the number of solar panels in the two inputs must be the same to avoid damage or
charging problems of the equipment due to inconsistent voltages of the two channels.
The following way of connections are prohibited to charge this product:
SolarSaga×2
SolarSaga×3
SolarSaga×3
Jackery SolarSaga 80 Solar Panel Connection Guide
Users who have purchased Jackery SolarSaga 80 can charge the product by referring to the
connection mode shown below. The Jackery SolarSaga 80 supports the parallel connection or the
parallel and then series connections to charge the product. The single input port of the Jackery
Explorer 2000 Plus supports the input of up to six pieces of SolarSaga 80 solar panels, and two input
ports support the input to up to 12 pieces of SolarSaga 80 solar panels. (When the power is
connected with six solar panels in a single input port, the solar panels shall be divided into two
groups, and each group of three solar panels shall be self-connected in parallel and then connected
to Jackery Explorer 2000 Plus through the solar series connector. The solar series connector needs to
be purchased separately.)
For detailed operation instructions on the self-parallel connection of the Jackery SolarSaga 80 solar
panel, please refer to the user manual.
AC 230V 10A MAX
2000 Plus
Explorer
AC 230V 10A MAX
2000 Plus
Explorer
AC 230V 10A MAX
2000 Plus
Explorer
GB
SolarSaga×1
SolarSaga×1
SolarSaga×2
07
Publicité
