Publicité
1. Please read these instructions before use.
2. To light the blowtorch, pull the 1. LOCK towards you and turn the 2. GAS DIAL counterclock-
wise – you will hear the gas start to flow. Immediately press the 3. IGNITION SWITCH to ignite
the gas.
3. You can adjust the gas flow rate using the 2. GAS DIAL.
4. To extinguish the blowtorch, turn the 2. GAS DIAL clockwise until you hear the 1. LOCK click.
The gas should stop burning.
5. To refill the gas, flip the blowtorch over and attach an upside-down gas can to the 4. GAS
REFILL VALVE at the bottom, then wait a few minutes for the blowtorch to refill. Remove the
gas can, turn the blowtorch upright and let it sit for a few minutes. Please only use compatible
butane gas refill cans.
Caution:
DO NOT TOUCH the burning flame, which can reach temperatures of up to 1300 °C
DO NOT SUBMERGE a burning or recently extinguished blowtorch under water – let it cool
down on its own.
DO NOT BRING the blowtorch close to your eyes – protective goggles and gloves are recom-
mended.
DO NOT STORE or USE at temperatures above 40 °C.
CHECK that the gas is not flowing when the blowtorch is not in use.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS
1 – LOCK
2 – GAS DIAL
3 – IGNITION SWITCH
4 – GAS REFILL VALVE
3
2
1
4
EN
5
Publicité
