en-us_main.book.book Page 16 Wednesday, August 14, 2024 9:51 AM
16 INSTALLATION
Assembling the Right Refrigerator
Door
CAUTION
• Install the right-side door first.
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
2
Fit the hinge
over the hinge lever latch
a
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
3
Connect the wire harnesses
4
Assembling the Left Refrigerator
Door
• Install the left refrigerator door after the right
door is installed.
1
b
c
2
.
d
3
Place the cover
in its place. Insert and
e
tighten the cover screw
.
f
CAUTION
Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
Fit the hinge
over the hinge lever latch
a
and slot it into place. Rotate the lever
clockwise and fasten the hinge.
Connect all the wire harnesses and the
ground wire.
b
c