Publicité
English
2 - Introduction
The COMBO120Evo COMBO240Evo are the fruit of many years' experience of the Audiophony-Pa®
brand in the field of amplification and multiple sources.
Their ease of use, speed of execution and robustness make them extremely efficient devices.
The guide you are now reading will help you quickly familiarize yourself with the various functions and
possibilities of the COMBO120Evo and COMBO240Evo.
Keep it close at hand during the first few uses of your device, so that you can familiarize yourself with its
functions.
3 - Package contents
The packaging should contain the following items:
- Amplifier
- Euroblock connectors
- IEC power cord
- Radio antenna
4 - Device presentation
4 - 1 Front pannel
1
1
Multimedia player
This player integrates the following sources: USB, Tuner,
Bluetooth® or DAB+. It also lets you select songs and
2
radio stations, and adjust output levels.
2
CH 1, CH 2, CH 3 et CH 4 potentiometers
These potentiometers adjust the levels of the CH 1, CH
2, CH 3 and CH 4 inputs..
3
1
AUX potentiometer
This potentiometer adjusts the level of the AUX input.
4
Potentiomètre MEDIA
Ce potentiomètre permet de régler le niveau du lecteur.
5
Potentiomètres BASS et TREBLE
Ces potentiomètres permettent de régler les niveaux des
basses et des aigus. Il agissent sur une plage de -10dB
à +10 dB.
6
MASTER potentiometer
This potentiometer adjusts the overall level of the
amplifier.
Page 10
COMBO120/240Evo - 100V 120/240W mixer/Amplifier - USB-Tuner-BT-DAB+
2
3
4
3
4
5
7
Indicator LEDs
These LEDs give an indication of the amplifier's status:
- SIGNAL : Indicates that a signal is present at the
6
power stage input. Lit green.
- CLIP : Indicates that the current signal level is too
high. Lit red.
- PROTECT : Indicates that the amplifier is in protection
mode due to overheating or short-circuit.
Notes :
5
- It is normal for the PROTECT LED to light up for a
few seconds when the amplifier is switched on.
If the PROTECT LED remains lit, switch off the
amplifier, wait for it to cool down and check the wiring.
If the PROTECT LED remains lit when the amplifier
is switched on, even though it is not warm and all the
wiring is correct, consult a specialist technician.
8
Power ON switch
Switches
the
When the amplifier is switched on, the button ring is lit
in white.
6
7
8
7
8
9
10 11
12 13
amplifier
on
and
off.
Publicité
