Publicité
DÉPANNAGE
problem
Appliance stops
working
The ingredients
cooked using the
air fryer are not yet
fully cooked.
The ingredients
exhibit uneven
frying results in
the air fryer.
White smoke is
emanating from
the appliance.
possible cause
The appliance is not currently
connected to the mains power
supply.
It appears that the timer has not
been set.
The quantity of ingredients in the
removable bowl exceeds the
recommended capacity.
The set temperature is
insufficient. Adjust it to the
recommended temperature setting.
The preset temperature is too low.
Certain categories of ingredients
necessitate agitation at the midway
point of the preparation time.
greasy ingredients put in the
appliance.
Please insert the mains plug into an
earthed wall socket.
Adjust the timer to the desired
preparation time in order to activate the
appliance.
Please place smaller batches of
ingredients in the removable bowl, as
smaller quantities ensure more even
frying.
The designated preparation time is
insufficient. Set the timer to the
required preparation duration.
Adjust the temperature to the specified
setting.
Ingredients that are stacked or overlap,
such as fries, should be shaken
halfway through the preparation
process.
Ensure meticulous control of the
temperature, maintaining it below 80°C,
when air frying ingredients with high fat
content.
16
solution
Publicité
