Publicité
Video Features
The system features an Intel integrated GPU. You can
switch display devices, and configure display options,
from the Display control panel in Windows as long as the
video driver is installed.
To access the Display control panel in Windows:
1. Right-click the desktop and select Display settings from the
menu.
2. Choose the required display settings from the menus.
Figure 14 - Display settings
To access the Intel
®
Graphics Command Center:
1. Access the Intel® Graphics Command Center from the Start
menu in Windows
18
Display Devices
Note that you can use external displays connected to the
HDMI-Out port and/or USB 3.2 Gen 2 Type-C port with
DisplayPort (Factory Option). See your display device
manual to see which formats are supported.
Configuring the Displays in Windows
All external and internal displays (up to 3 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them)
on.
2. Press the
combination.
3. Click on any one of the options from
the menu to select PC screen only,
Duplicate, Extend or Second
screen only.
4. You can also click Connect to a
wireless display at the bottom of
the Project screen and follow the
steps to connect to any wireless
enabled display.
.
+ P (or Fn + F7) key
Figure 15
Project
Publicité
