voestalpine Bohler Welding URANOS NX 4000 TLH Manuel D'instructions page 49

1.7.2 Installation, use and area examination
The user must be an expert in the activity and as such is responsible for installation and use of the equipment
according to the manufacturer's instructions. lf any electromagnetic interference is noticed, the user must solve the
problem, if necessary with the manufacturer's technical assistance.
1.7.3 Mains power supply requirements
1.7.4 Precautions regarding cables
•
•
•
•
•
•
1.7.5 Earthing connection
1.7.6 Earthing the workpiece
1.7.7 Shielding
1.8 IP Protection rating
IP23S
IP
• Enclosure protected against access to dangerous parts by fingers and against ingress of solid bodies objects with
diameter equal or greater than 12.5 mm.
• Enclosure protected against rain at an angle of 60°.
• Enclosure protected against harmful effects due to the ingress of water when the moving parts of the equipment
are not operating.
1.9 Disposal
45
WARNING
EN