Publicité
Assembly instructions：
Assemble two sets of fiber rods, 4
long rods A and 8 short rods B.
Two people work together to flip the top of the tent over and tidy up the sides of the tent.①:1
person is supporting the tent outside, and 1 person is inside putting the rubber free cap end
of the B pole Thread into the metal L-junction;②:The rubber cap is threaded into a white
pocket at the bottom;③:Fix the middle position with Velcro.
Lay the tent flat on the ground, with 8 metal L-bends
facing upwards.①:Four A-poles are placed cross at a
45 degree angle next to the metal passage, and the
two ends of the poles are threaded into the metal
passage in order;②:Fix the pole with Velcro on the
tent;③:Tie the four poles tightly with straps at the
intersection in the middle.
4
Publicité
