Publicité
ENI
Connect
Connect coaxial cable to antenna
1
Connect supplied coaxial cable to the back
of the antenna.
2
Connect the coaxial cable from your cable
or satellite source to the back of the
antenna to the connector labeled IN
FROM CABLE.
Connect coaxial cable to TV
Connect the supplied coaxial cable from the
antenna to the back of your TV using one of
the two methods illustrated'^.
Connect power
Connect the power transformer to the antenna
then to AC power outlet.
''If y&u have screw Mnneccicins &n yourTV, attach the cable c& the inacching, transiformer and then to
^ourTV You will need a band separator {not included) co access UHF reception, if you have a 75 ohn^
jack and a set of UHF screw connectors on your TV, attach a coax cable to the 75 ohn^ jack. You will
need a band separator (not included) to access UHF reception.
3
Publicité
