Publicité
STEP 16
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
With help, place the unit on its side.
Unfold the back panel. With the finished surface facing in, slide the back panel into the groove in
the Left and Right Panels (A&B) seating into the groove in the Top (C). Note, the back panel will be
in front of the Stringers (I).
Note: you may need to press lightly near top of the back panel from the inside face to help
insert the top edge into the groove in the top (C).
C
I
ameriwoodhome.com
A
B
I
23
J
Publicité
