Publicité
To Assemble
1
1a
Footrest: Insert the footrest into one of the two height positions in
footrest bar and push down to lock (Figure 1a-c).
2
2a
Upper legs: Fit two upper legs to the footrest bar. The upper legs are
shorter and have a plastic ring at the tip (Figure 2a). Snap the upper
legs into the seat, with the footrest assembly facing forward. Rotate
the legs until the locking pins engage the opening (Figure 2b). Snap
all four upper legs into seat. NOTE: Pull on each leg to ensure all
legs are assembled securely.
3
3
06
1b
1c
2b
Lower legs: Fit the four lower legs
to the tips of the upper legs. Ensure
that the pins are have emerged from
all the legs correctly (Figure 3). NOTE:
Pull on each leg to ensure all legs are
assembled securely.
4
4b
4a
Tray: The tray can be fitted in two different positions using the seat
inserts (Figure 4a). Choose the desired distance, align the front
latch, insert the tray and push down (Figure 4b). Pull up on tray to
ensure it is secure.
To remove the tray, press the latch located at the bottom of the tray
forward (Figure 4c).
The tray can be stored on the back of the chair, fitted by the edges
(only in high chair mode) (Figure 4d).
Using High Chair
1
Using Restraint System:
Place child in the seat with the crotch strap between the child's legs
and fasten both buckles (Figure 1a). Adjust straps (at five buckles) to
tighten snugly such that you can comfortably slide your finger
between the strap and your child (Figure 1b). NOTE: Squeeze to
release buckle.
WARNING:
• Always secure child in the restraint belt. Adjust to fit snugly.
4c
4d
07
Publicité
