Publicité
ASSEMBLY
1. Connect the Stainless-Steel Tube (#3) to the Water Dispenser
Pump. (#2)
2. Connect the Silicon Tube (#4) to the bottom of Water Dispenser
Pump. (#2)
3. Insert the plastic tube insert (#5) into the Silicon Tube. (#4)
4. Fully charge the Water Dispenser Pump (#2) using the supplied
Micro USB Cable (#6) – about 3-4 hours.
OPERATION
1. Place the Water Dispenser Tube into the Water Bottle. Ensure
that the water bottle cap remains ON. (Figure 1)
2. Press the top button (#1) to turn Water Pump On.
3. Press the top button (#2) to turn Water Pump OFF.
SAFETY WARNING
1. This Portable Water Dispenser Pump is designed to dispense
Water only. Do not use this water pump to pump any other
types of liquids.
2. This Portable Water Dispenser Pump is designed to dispense.
room temperature water. Do not use with water bottles which is
hot. (over 50˚C)
Owner's Manual
Publicité
