Publicité
4. CONTROLS
Key
Key press
Short
A
Long press with
all loads off (mo-
tor and lights)
-
-
B
Short
Long press with
motor off
C
Short
Long press with
lights or motor
on
Long press with
all loads off (mo-
tor and lights)
D
Short
Long press with
all loads off (mo-
tor and lights)
E
Short
Recommended device coupling sequence:
1 - K-Link Mode (See "connected mode" of remote control manual)
2 - K-Link Coupling (See hood manual)
3 - Remote Control-Hood Coupling (See remote control manual)
4 - K-Link Coupling (See hood manual)
5 - Cooktop-Hood Coupling (See induction cooktop manual)
14
Function
Turns the motor on/off at the first speed.
K-Link uncoupling
Starts the procedure for the cancellation of all compatible K-Link
devices previously coupled with the K-Link coupling function.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective hood
operation.
Signals the Activated Charcoal Odour Filter saturation alarm. The
alarm is activated after 200 hours of effective hood operation.
Turns the motor on at the second speed.
Activates/Deactivates the Activated Carbon Filters alarm.
When the carbon filters alarm is activated, the Intensive speed is
no longer timed to 6 minutes but has an infinite duration.
Turns the motor on at the third speed.
Turns the motor on/off at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the system
automatically returns to the previously selected speed.
When the carbon filters alarm is activated, the Intensive speed is
no longer timed to 6 minutes but has an infinite duration.
The Filter saturation alarm is reset.
Switches on/off the anti-condensation heater
K-Link coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
For the remote control, see "connected mode".
Starts the pairing procedure between the hood and compatible K-Link
devices (induction cooktop or remote control). Up to 3 induction cook-
tops can be paired and only one remote control. See the manual of
the devices for details of the operations that need to be performed on
these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be coupled. The maximum number of linkable
devices may have been reached.
AUTO mode is activated when the Coupled Induction Hob is
switched on. The hood speed is automatically set using the highest
power level present on the hob. When the induction cooktop is turned
off the last activated speed is held for 5 seconds, then speed 1 for 15
minutes. Once the 15 minutes have passed the motor turns off. The
light status does not change.
Switches the lights on/off at maximum intensity.
LED
On / Off
Upon successful com-
pletion of the procedure
LEDs A and B flash 5
times.
LED A flashes once per
second.
LED A flashes twice per
second.
LEDs A+B+D are lit.
LED A flashes twice:
alarm activated.
LED A flashes once:
alarm deactivated.
LEDs A+C+D are lit.
Flashing
All LEDs flash twice
LED D lights up and is
permanently lit together
with the set speed LED.
LEDs A and B flashing:
coupling in progress.
Upon successful com-
pletion of the procedure
LEDs A and B will light
up for 2 seconds.
Fixed
Publicité
