Publicité
Liens rapides
Publicité
Sommaire des Matières pour vipp 525
- Page 1 VIPP525 Floor reading lamp User’s manual...
- Page 2 In the event that the appliance is modified or tampered with, any warranty by Vipp will be void and Vipp shall not be liable for any damage to the appliance, other products, persons, or any other damage.
- Page 3 Si le dispositif est modifié ou trafiqué, toute garantie par Vipp devient nulle et Vipp ne peut être tenu responsable pour tout dommage au dispositif, aux autres produits, aux personnes, ou pour tout autre dommage.
- Page 4 European directives and ensures that the product may be legally placed on the European market. Vipp luminaire products are designed with respect to the Low Voltage Directive (LVD) 2014/35/EU. The luminaires are constructed and safety-tested according to the IEC standard 60598-1, 60598-2-1, 2-4 and according to the UL standard 153 and 1598.
- Page 5 Dimming** Possible with retrofit For further specifications, please visit vipp.com. * Light source is regionally dependent. Look on the inside of your lampshade for details. ** Please note that the lamp is not dimmable from the factory. Dimming is possible if the lamp is retrofitted with a dimmable LED bulb and a suitable dimmer.
- Page 6 Dimensions...
- Page 7 Assembly instructions 1. While the lamp is still in the box, remove the rubber band holding the plastic washer (1). 2. Remove the lamp from the box and place it on the base. Instructions d’assemblage 1. Alors que la lampe est encore dans la boîte, retirez l’élastique qui retient la rondelle plastique (1). 2.
- Page 8 Setting lamp position 1. Set the position of the lamp by tightening the finger screws. Use a hex key or similar tool for assistance. Réglage de la position de la lampe 1. Réglez la position de la lampe en serrant les vis à main. Utilisez une clé hexagonale ou un outil similaire pour vous aider.
- Page 9 Light bulb change Attention Switch off the power supply before any operation such as replacement of the bulb, cleaning, connection to mains etc. 1. Loosen the finger screw on the back of the lamp shade while holding underneath the glass diffuser. 2.
- Page 11 CONTACT Vipp HQ Snorresgade 22 | 2300 Copenhagen S | Denmark +45 4588 8800 | info@vipp.com Vipp Concept Store and Kitchen Showroom Ny Østergade 34 | 1101 Copenhagen K | Denmark +45 4588 8815 | cph@vipp.com Vipp USA LLC Showroom...
- Page 12 27.06.2024 V. 4.0...