Publicité
Les langues disponibles
Les langues disponibles
NOTE: Multiple Smart Control Hubs can be used to assign
multiple colors simultaneously.
NOTE: The Smart Control Hub is weather resistant, but
not waterproof. Install it off the ground and protected from
the elements.
• Aquascape color-changing lights are designed to operate
on a 12-volt, outdoor-rated transformer (not included).
NOTE: It is recommended to locate the transformer as
close to the light fixtures as possible to avoid voltage
drops caused by long cable runs.
• Plug the transformer into a GFCI-protected outlet.
PAIRING PROCEDURE
• Plug the Smart Control Hub into a 12-Volt transformer, and
the unit will automatically enter pairing mode.
NOTE: The blinking blue light on the face of the unit
indicates the hub is in pairing mode and
ready to be connected.
• Download the Aquascape Smart
Control App (available on iOS or
Android App Store).
• Open the Aquascape Smart Control
App and click 'Create New Account'
(Ex. 8).
NOTE: If you already have an account,
login with your username and
password.
• Once logged in, click the three dashes
in the upper, right-hand
corner of the home screen
(Ex. 9).
• Click 'Add New Device'
(Ex. 10).
NOTE: Adequate WiFi
coverage is required (2.4
GHz networks supported).
• Continue to follow on-screen
instructions to complete the
pairing process.
• To reset the device to factory
defaults, press and hold
the pairing button for ten
seconds and release when
the light begins rapidly
flashing (Ex. 11).
General Maintenance
• Periodically clean the fixture with fresh water, removing any
existing algae, debris, or buildup.
04/24
aquascapeinc.com |
☎
CAN (866) 766-3426 |
Ex. 8
Ex. 9
Ex. 10
Ex. 11
For more information about our company or products, please visit our website at
aquascapeinc.com or call us at US (866) 877-6637 CAN (866) 766-3426
©2024 Aquascape, Inc. • All Worldwide Rights Reserved
☎
US (866) 877-6637
Troubleshooting
• Lights won't turn on
– Make sure the outlet is receiving power
– Make sure the ground-fault circuit interrupter (GFCI) is
not tripped
– Check to verify that the lights are receiving the correct
voltage
– Verify the Smart Control Hub is properly paired, re-pair
the device
• Lights won't turn off
– Verify the Smart Control Hub is properly paired, re-pair
the device
• Device won't pair
– Make sure the outlet is receiving power
– Make sure the network name and password are typed in
correctly
– Make sure you have adequate wireless coverage to
connect the device
– Reset the device to factory defaults (refer to Ex. 11)
– Make sure the ground-fault circuit interrupter (GFCI) is
not tripped
Replacement Parts
11-Watt Wide-Angle Color-Changing Light Replacement Parts
No.
Item number/description
1.
84083 – Universal Mount Adapter
Warranty Information
5 YEAR WARRANTY
Aquascape warrants that the 11-Watt Wide-Angle Color-
Changing Light will be free of manufacturing defects for five
years after date of purchase. Proof of purchase required.
Warranty does not cover damage resulting from electrical
supply problems, improper wiring, lightning, negligent
handling, misuse, or lack of reasonable maintenance or
care. This product should only be operated in fresh water
without corrosive chemicals like chlorine or bromine. If
upon Aquascape's inspection, the light shows evidence
of a manufacturing defect, Aquascape's liability is limited,
at Aquascape's option, to the repair of the defect, or the
replacement of the defective product or refund of the original
purchase price. The warranty excludes costs of labor, removal
of product, shipping and expenses related to the installation
and re-installation of the product. No liability for loss or damage
of any nature or kind, whether arising out of or from the use of
the product, whether defective or not defective, is assumed by
Aquascape, Inc. or its affiliates. Aquascape shall not be liable
for any incidental, consequential or other damages arising
under any theory of law whatsoever.
3
Publicité
