Publicité
Control Panel (Continued)
Temperature Display
CT
This will show the temperature of the evaporator or environment
Evaporator Coil/Environmental Temperature
F/C
be illuminated. When in Fahrenheit scale, will turn off. If the temperature shown
is higher than 99°F, the scale will be set to Celsius automatically
Fahrenheit/Celsius Scale
Fan Speed
This will show if the machine is running on low (
dehumidifier will control the fan speed according to the environmental temperature
and humidity.
CT
Total Running Time
F/C
This will show the total running time from the first usage to the current moment.
Running time starts to count during the time when the machine turns on. The value
can't be reset.
Indicators
Defrosting Light
This light indicates the evaporator coil
or environmental temperature is too
low. Frost may start to appear on the
evaporator coil. The machine is now
defrosting.
Constant Dehumidification
At the humidity level setting of 30%, if
humidity control button "-" is pressed,
w ill blink on the humidity display.
%
The machine will enter into constant
dehumidification mode and won't stop
dehumidification as environmental
humidity changes.
Error Codes
These are error codes. Please refer
to Troubleshooting Guide for more
information.
°C
Switch).
CT
CT
TOTAL TIME
F/C
F/C
°C
%
% %
RH
,
,
,
,
,
Switch). When in Celsius
CT
F/C
) or high (
Dehumidification Light
When this light blinks, it indicates
the machine is now preparing for
CT
dehumidification. When this light stays
bright, it indicates the machine is now
dehumidifying.
F/C
Drainage Indicator Light
RH
When this light blinks, it indicates the
machine is in drainage process. When
CT
this light stays bright, it indicates the
water tank is full.
F/C
(See Page 8:
°C
scale, will
(See Page 8:
) fan speed. The
English - 9
Publicité
