Publicité
NOTICE_UK_CEP9002:Layout 1
OPERATING INSTRUCTIONS
States Of Indicating LED:
1. GREEN: Power on, Float charge
2. RED: Fast charge
Proper Charging Procedures:
1. Input voltage: 100-240VAC, 50/60Hz ·
2. Make sure charger's output voltage matches battery's input vol-
tage.
3. Plug in charger before connecting output leads to the battery.
GREEN LED indicates power is ON.
4. After hooking battery up to charger, RED LED will light up indicating
FAST CHARGE.
5. GREEN LED will come on charger has switched to FLOAT CHARGE
indicating that battery is close to be fully charged.
always be followed, including: Read all the instruction before using the charger;
To reduce the risk of injury close supervision is necessary when the charger is used near children.
CHARGING RECOMMENDATIONS FOR CYCLIC APPLICATIONS
6/10/09
12:24
Page 1
SEALED LEAD- ACID BATTERY CHARGER
IMPORTANT SAFETY INSTRUCTIONS:
--- WARNING ---
When using the charger, basic precautions should
CAUTIONS
Important Safety Information:
1. Always use basic precaution such as paying close attention to pro-
per matching of charger and battery and correct polarity connection,
positive (RED) to positive, negative (BLACK) to negative.
2. Read the instructions and charging information before using any
charger. ·Keep children away from charging set-up.
3. Indoor use only. Remove charger from AC outlet when charging is
completed.
4. Avoid shock and water.
ChargeVoltage ( V)
2V
6V
G
2.70
8.00
F
2.67
7.50
E
2.50
7.00
D
2.33
6.50
C
2.00
6.00
B
1.83
5.50
A
1.67
5.00
CEP9001/CEP9002
12V
24V
36V
16.00
32.00
48.00
15.00
30.00
45.00
14.00
28.00
42.00
13.00
26.00
39.00
12.00
24.00
36.00
11.00
22.00
33.00
10.00
20.00
30.00
Publicité
