Publicité
4. Using the heater control
The heater button (4) turns the heater on or off. There is no speed setting for the heater blower. If you put the heater in a
standby mode (turn off by the main power button 6), the unit will hold the settings in the memory. When the power is turned
back on, the heater will turn on at the same settings.
When the heating function turns on, press and hold the heater button (4) for five seconds to enter temperature adjustment
mode. (The remote control does not have this function, but it can adjust the temperature by pressing the increase button or
the decrease button after pressing the heat button to enter the digital flash.) The LED indicator is red. In adjustment mode,
the display unit (1) flashes (interval is 0.5 second). There are 22 levels to change Fahrenheit temperature
72°F–73°F...82°F–ON—62°F–63°F ...71°F. After this is set, the display (1) will flash five times and exit from setting status.
With the heater on, gently press and hold the main power button for five seconds to enter temperature converting
mode. The LED indicator flashes five times in red color then changes to green. In this converting mode, the display
(1) flashes (interval is 0.5 second). Press and hold the heater button (4) for five seconds to enter temperature
adjustment mode. There are 12 levels to change Celsius temperature 22°C
After it is set, the display (1) flashes five times. Repeat the same process to convert Celsius temperature into
Fahrenheit temperature.
5. Using the flame control
Press the flame button (5) to set the flames for different levels of flame height. These flame levels are shown in the
display (1). The flame settings are as follows:
Button Press
1st press
2nd press
3rd press
4th press
When the heater function turns on, the flame level will cycle through the 3 different level settings continuously.
Button Press
1st press
2nd press
3rd press
All manuals and user guides at all-guides.com
Flame Level
Display Value
High
Medium
Low
All Off
Flame Level
Display Value
High
Medium
Low
–
23°C ...27°C
4
L3
Flames Highest, Logs Glow Highest
L2
Flames Medium, Logs Glow Medium
L1
None
L3
Flames Highest, Logs Glow Highest
L2
Flames Medium, Logs Glow Medium
L1
5
E-5
–
ON
~
17°C
–
18...21°C.
Fireplace Appearance
Flame Low, Logs Glow Low
Flame Off, Logs Off
Fireplace Appearance
Flame Low, Logs Glow Low
Publicité
