Publicité
EN
Swing Assembling
1.
Swing arrives in 4pcs tubes,
2 hanging ropes, a string light,
and a swinging body for
assembly.
2.
Insert the tube with foam into
the sleeve.
3.
Insert the 2nd tube into the
sleeve; connect two tubes by
small socket to big socket.
Repeat it until all the tubes
connected to form a circle.
10
4.
Insert the screw bolt into the
holes of frame tube. Make sure
the holes are aligned.
5.
Fix it by washer and nut, use
wrench to tighten it.
6.
Repeat above steps to
secure all the hanging ropes.
EN
11
Publicité
