Publicité
5100067_2024.06_FR
4 INSTALLATION
Montage
Fix the DVG500 EVO 20-4mA vacuum gauge through the two holes
Connect the vacuum gauge to the vacuum pipes using a 1/8" threaded nipple.
AVERTISSEMENT
Always install the DVG500 EVO device ABOVE the vacuum line. Do not allow the vacuum
tube to have too narrow bends or basins which could fill with condensate thus affecting the
correct vacuum value reading
Er
OK
Le present manuel appartient a InterPuls S.p.A. - toute reproduction, meme partielle, est interdite.
184mm (7,24in)
Er
10
Er
Instructions originales
R3,25mm
(0,13in)
NO
Publicité
