Publicité
EN
USER GUIDE
SURFACE MOUNTING BOX
Reference: BPS-1-1-00
Operational temperature: 0°C to 40°C
Protection rating: IP 44
Dimension: 80 mm (l) x 93 mm (L) x 29.5 mm (h)
Cable supplied: 4x1.5 length 1.40 m
Weight: 100g excluding module and cable
Warranty: 2 years
USE CAUTIONS
The NodOn Surface Mounting Box is an accessory that cannot
be used alone.
The Surface Mounting Box is compatible with all our SIN type modules
(supplied with a cable compatible with most uses).
APPROVALS AND CERTIFICATIONS
This product complies with all the requirements of
the European directives.
This logo means that the appliance should
not be disposed of with household waste. The
components contained in this product must be
recycled selectively so as not to risk harming health or the
environment. Have your dealer take back these appliances
or use the separate collection facilities provided by your
local authority.
This product must be used indoor only.
CONTACT
AFTER SALES SERVICE
NodOn SAS
nodon.fr/en section "support"
support@nodon.fr
121 rue des Hêtres
45590 St CYR EN VAL
(FRANCE)
DANGER OF ELECTROCUTION
BEFORE ANY INSTALLATION MAKE SURE THE POWER
SUPPLY IS DISCONNECTED TO AVOID ANY RISK OF
ELECTROCUTION.
Directly cut the power supply from the breaker box to avoid
any risk of electrocution. This relay switch is designed to
be used power up, a wrong installation can create a fire or
an electric shock. If you are not confident about electrical
installation, please ask a professional.
The relay switch must be installed and connected carefully
following the instructions of this user guide. We will not be
responsible for any loss or damage resulting from a non-
respect of the instructions of this user guide. Cut the power
supply before any operation and don't do any modification
if the LED is still ON.
INSTALLATION
Cut the power supply.
1
Fix the Surface Mounting Box to the wall (use fixings - not
2
included - suitable for the bracket) - see figure 1.
Connect the module according to its type* with the cable
3
supplied - see figures 2A and 2B.
Clip the module into the Surface Mounting Box - see figure 3.
4
Tighten the cable grommet - see figure 4.
5
Refit the intermediate plate and screw it in place with the 4
6
screws provided - see figure 5.
Refit the waterproof cover - see figure 6.
7
Turn the power supply back ON.
8
*
find all the installation diagrams on the "Support" section on
nodon.fr/en/technical-support/
Drilling areas
Drill through the
for screw fixing
inside of the housing
Figure 1
** cable supplied - information
Cable compatible with most uses.
Strip the cable as follows:
25mm
5mm
Figure 2A
Figure 2B
Figure 3
Figure 4
Figure 5
Figure 6
USE AND PAIRING
Please refer to the manual of the module
used, available on nodon.fr/en/
technical-support/
USO Y EMPAREJAMIENTO
Consulte el manual del módulo
utilizado. Disponible en el sitio web
nodon.fr/es/soporte/
VERWENDUNG UND KOPPELN
Beziehen Sie sich auf die Anleitung
d e s v e r w e n d e t e n M o d u l s .
Verfügbar auf der Website nodon.fr/de/
technische-unterstuetzung/
Publicité
