Nemo HORNET Serie Mode D'emploi

INSTRUCTIONS FOR SETUP
1
Insert Poles in Corner Anchors
Lay the inner tent on the ground and arrange pole set so
pole color matches corner webbing color. Press the ball
end of each pole into its corresponding Jake's Foot™
fitting and insert locking pole tip into corner grommet.
2
Attach Inner Tent to Poles
Attach the inner tent canopy to the poles using pole clips.
The integrated Flybar™ clip attaches like a normal pole clip
but significantly increases headroom and interior volume.
3
Stake in Place
Position your tent as desired and stake the four corner anchors. As
you pull at the corners, watch the tension in the floor of the tent to
keep it even. If the ground is too hard for stakes, tie anchors to rocks
or other heavy objects.
4
Attach Rain Fly
Cover the inner tent with the rain fly. Locate the webbing straps on
the corners of the fly and clip to the outermost bar on the Jake's
Foot™.
5
Tension Fly and Vestibule(s)
Secure poles to rain y with internal pole wraps. Stake vestibule(s)
and pull rmly on all adjustable corner anchors. Add guylines for
additional strength. A properly tensioned tent ensures maximum
water shedding and wind resistance.
6
Volumize (optional)
Locate integrated small plastic hook(s) to connect rain fly to inner
tent near door(s). Attach each hook to its corresponding webbing
loop for increased interior volume.
Remember to leave no trace. Before leaving your campsite, take
a thorough look around making sure you have not left anything
behind, out of place, or damaged.
©2019 NEMO Equipment, Inc.
To contact NEMO Customer Service
Email: journey@nemoequipment.com
Phone: 800-997-9301
HORNET
SERIES
™