Publicité
BOX CONTENTS
-
Blower
-
Blower tubes
-
Instruction manual
•
Remove the product and accessories from the box. Make sure all items are present.
•
Inspect the product to ensure that it has not been broken or damaged in transit.
•
Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
ASSEMBLY
Connect the two blower tubes together. To connect the two blower tubes, the tube (A) must be inserted into the tube
(B) in such a way that it fits perfectly into the tube (B) as shown in the drawing. Once this is done, rotate the tube (B)
following the notches until the anchor reaches its stop.
Insert the two joined tubes into the air outlet all the way down and repeat the above operation so that the pieces fit
together. Then tighten the screws (or screw) (C) to secure the tube anchorage.
A
C
B
47
EN
Publicité
