Publicité
6. Secure the FreshWater Salt system
Controller to the spa frame with a zip tie.
7. Install FreshWater Salt System Cartridge
•
Unscrew Cap from the Cartridge
Housing 7A.
•
Remove Plug from the Cartridge
Housing by pushing the button on top
of the Plug handle and pulling upwards.
Do not discard, save in the equipment
compartment.
•
Install the FreshWater Salt System
Cartridge 7B by pushing the button on
top of the handle and inserting it into
the Cartridge Housing.
•
Replace Cap.
7A
FreshWater
®
7B
Salt System
8. Turn system on and verify the green power
LED is lit on the controller.
9. Replace the equipment compartment
panels. The installation is complete.
10. Consult FreshWater Salt System
Owner's Manual for further instructions.
Page 3
Publicité
