Publicité
Using USB-C Port (Fig. 4)
The battery pack features a
USB-C port, which can provide
5/9/12/15/20V
power compatible USB devices.
a. Open the rubber USB-C port
cover.
b. Connect an appropriate USB
device (cell phone, etc.) to the
battery pack using a standard
USB-C cable (included in select kits).
c. Press the fuel-gauge button to activate the USB-C port. The fuel
gauge lights will shine solid green when powering a connected
device.
d. When finished powering an external device, disconnect the
USB-C cable, and close the USB-C port cover to protect the port
from moisture and contamination.
WARNING
is charging . USB-C Port and terminal connector of battery are not
allowed to use at the same time, one is working and another is
forbidden the use of charging or discharging.
Fuel Gauge
The four LEDs on the battery comprise the Fuel Gauge, indicating
the current battery capacity when the fuel-gauge button is pressed.
The first LED of the fuel gauge will flash green to indicate that the
charge level of the battery pack is low. Recharge the battery pack
as needed.
16
3A max output to
Do not use the battery pack to charge or
power a USB device when the battery pack
Fig . 4
USB-C Port Cover
Fuel Gauge
Button
USB-C Port
Publicité
