Publicité
Remove top cover;
Connect your antenna to the connectors;
Open the bottom cover;
Connect Ethernet cable to the port;
Connect Ethernet cable to the PoE injector;
Connect the PoE injector to a PC;
Connect included power adapter to the PoE;
Download the configuration tool https://mt.lv/winbox;
Open and connect to the device, the IP: 192.168.88.1, user name: admin, no password (or, for some
models, check user and wireless passwords on the
If an IP Address is not available, then open the Neighbors tab;
Connect using MAC address;
Download the latest RouterOS software from https://mikrotik.com/download;
Choose MIPSBE packages, and save them to your PC;
Open WinBox and upload downloaded packages, use a mouse and drag the file into any windows;
Restart the device;
Connect again and in the QuickSet menu set your Country, to apply country regulation settings;
Set antenna gain, depending on what antenna is used;
Secure your device and set a strong password.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions
carefully before beginning installation. Failure to use the correct hardware and configuration or to
sticker);
Publicité
