Publicité
(For all other regions including Colombia, Excluding
the above countries)
Transmission
(m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)
(Data 03)(Data 04)(Cr)
(Data 00): Physical Channel Number
(Data 01)(Data 02): Channel Data
- (Data 01): High Channel data
- (Data 02): Low Channel data
00 00 ~ 27 0F (Decimal: 0 ~ 9999)
(Data 03): Input Source
- 10: Antenna TV (DTV)
- 20: Antenna Radio (Radio)
- 40: Satellite TV (SDTV)
- 50: Satellite Radio (S-Radio)
- 90: Cable TV (CADTV)
- a0: Cable Radio (CA-Radio)
(Data 04): block(01)/unblock(00)
Ack
(d)( )(Set ID)( )(OK/NG)(Data 00)(Data 01)(Data 02)
(Data 03)(Data 04)(x)
* Block/Unblock Command Examples
Block/Unblock Digital Antenna (DVB-T) Channel 800
(Set ID) = All = 01
(Data 00) = Physical Channel Number 30 = 1E
(Data 01) & (Data 02) = Channel Data is 800 = 03 20
(Data 03) = Digital Antenna TV = 10
(Data 04) = block/unblock = (01/00)
Result:
md 01 1E 03 20 10 (01/00)
30
24 Fail Over Mode (Command: m i)
► Selects the Fail Over mode.
Transmission
(m)(i)( )(Set ID)( )(Data)(Cr)
Data 00: Off
Data 01: Auto
Data 02: Manual
Ack
(i)( )(Set ID)( )(OK/NG)(Data)(x)
25 Fail Over Input Select (Command: m j)
► Selects an input source for fail over. (This feature is
only available when Fail Over is set to Custom.)
Transmission
(m)(j)( )(Set ID)( )(Data 1)( )(Data 2)( )(Data 3)( )(Data
4)...( )(DataN)(Cr)
Data 1-N (Input priority 1-N)
Data 20: AV1
Data 21: AV2
Data 22: AV3
Data 90: HDMI1
Data 91: HDMI2
Data 92: HDMI3
Data 93: HDMI4
Ack
(j)( )(Set ID)( )(OK/NG)(Data 1)(Data 2)(Data 3)(Data
4)...(DataN)(x)
* Some input signals may not be available for all
models.
* The data number (N) may vary depending upon the
model. (The data number depends on the number
of supported input signals.)
Publicité
