Publicité
Programming
Programming is carried out in the same way as with a mechanical timer. Programming can be done in either mains or battery power mode.
After setting a program, press the OK button
1 minute during programming, the current program will be saved.
TIME
DATE
SU WI
PROG
TEST
³
Virtually turn the dial to select the switch-on time first, e.g. Monday 06.15
Use
to select the hour, in this case 6. Then use
Use
to enable the switch-on period, e.g. Monday 6:15 until Monday 10:00
Hold down the 5-way switch
Use
to alter the switch-on period.
Turn the button
to reduce the switch-on period (OFF) or
Program all the other switching times.
The day changes at 00:00 hours.
Confirm the setting.
Altering/deleting programs
TIME
DATE
SU WI
TIME
PROG
DATE
TEST
SU-WI
PROG
TEST
Testing
Display the switching times from Monday to Sunday.
Each upward movement of the 5-way switch moves the display to the next switching state change. After the last switching state change in a
week, the display shows PROG END.
TIME
DATE
SU WI
PROG
TEST
to save it and view it in the program overview (see page 1). If no buttons are pressed for
0
TIME
DATE
12
SU-WI
PROG
24
TEST
OFF
to program in 15-minute increments.
1 2 3 4 5 6 7
0
12
24
ON
OFF
1 2 3 4 5 6 7
0
TIME
DATE
12
SU WI
PROG
24
TEST
OFF
1 2 3 4 5 6 7
ON
to set the minutes.
to extend the switch-on period (ON).
1 2
³
Select the switching time
Use
to alter the switch-on period.
Turn the button
to extend the switch-on period (ON).
Confirm the setting.
1 2 3 4 5 6 7
0
12
24
OFF
ON
ON
28 programs have been
stored. No more programs
can be added.
MEMO
FULL
1 2 3 4 5 6 7
0
0
12
12
24
24
OFF
ON
OFF
Sunday 23:00
Monday 0:00 Uhr
and
.
to reduce the switch-on period (OFF) or
PROG
NO
END
PROG
1 2 3 4 5 6 7
0
12
24
OFF
ON
1 2 3 4 5 6 7
0
12
24
OFF
ON
6 7
1 2 3 4 5 6 7
ON
No program set
Publicité
