Publicité
iCube Machine User Manual
6. PC software introduction
Mac
OS:LightBurn
Linux：LightBurn
Windows:LightBurn & LaserGRBL
LightBurn download:
https://lightburnsoftware.com/pages/do
wnload-trial
LightBurn usage documentation:
https://docs.lightburnsoftware.com/ind
ex.html
LaserGRBL
https://lasergrbl.com/download/
6.1 PC connection method 1 USB connection
①Connect the machine to the computer using a data cable
②Open computer management,Check the COM corresponding
to CH340
③After powering on, open
selecting the machine port. Ready to use
LightBurn
or
LaserGRBL
after
6.2 PC connection method 2 Bluetooth connection
①Connect the machine to the computer using a data cable
②After the machine is powered on, the computer opens the
Sculpfun Laser Tool configuration software
③Click Switch Bluetooth to switch the machine to Bluetooth mode.
The text box will display the Bluetooth name of the machine.
④Unplug the USB data
cable,Computer Bluetooth connection
machine
LightBurn
or
LaserGRBL
⑤Open
Bluetooth port
④
and select the corresponding
⑤
10
Publicité
