Télécharger Imprimer la page

Westinghouse WES42-0917 Manuel D'utilisation page 3

Publicité

5. Troubleshooting
• It is normal for the motor to make noise while in use.
• If the massager doesn't normally work, please check that the plug and socket are properly connected, and the
switch is turned on.
• After several uses, the massager might power off because of overheating. It can be used again after half an
hour of cooling time.
6. Components
7. Operation
Connect the massager to an AC outlet and allow the WES42-0917 to fully charge for 3 to 4 hours.
Put the massager on its charging base. A red indicator light on the handle will flash to signify the unit is
charging. Once recharged, the indicator light will turn blue. You can remove the massager from its
charging base and choose the massage accessory you want and enjoy its benefits. The massager's
battery can work up to 1.5 hours before a recharge.
During use, the indicator light will flash red if the battery life is down to 20%. You can put the unit on the
charging base to recharge.
Press the on / off button and press again to choose one of the three desired speeds.
When finished, deactivate WES42-0917 and replace it on its base.
You can also enjoy the WES42-0917 and its relaxing effects on the neck, shoulder, the legs, abdomen and
other body parts.
8. Product specifications
Voltage: DC adaptor input 100-240 V/50-60 Hz
9. Warranty
LIMITED ONE (1) YEAR WARRANTY
This product is guaranteed against all manufactured faults and defects for a period of one (1) year from
the date of purchase.
For repairs or product defects, please call our customer service department at:

Publicité

loading