Télécharger Imprimer la page

Publicité

Liens rapides

MODE D'EMPLOI
INSTALLATION INSTRUCTIONS
SHOKV1_NTALL (range)
vC_230220
RÉFÉRENCES
Références
SHOKV1
SHOKV2
SHOKV3
SHOKV4
CARACTÉRISTIQUES TECHNIQUES - TECHNICAL SPECIFICATIONS
Caractéristiques générales du déclencheur manuel - General specifications of the manual call point
Tension d'alimentation / Operating voltage : 12-24V DC (+10%)
Consommation / Consumption : 12V DC - max. 45 mA / 24V DC - max. 62 mA
Pouvoir de coupure / Switching rate (C/NO/NC) : 250V AC - 5 A / 30V DC - 4 A
Indice de protection / IP rating : IP 40 (utilisation à l'intérieur uniquement / only for indoor use)
Section des conducteurs / Conductor's cross section : max 1 mm²
Température de fonctionnement / Operating temperature : 0 / +50°C
Poids / Weight : 0,17 kg
Clé de réarmement
Reset Key
x2
SHOK_K
www.sewosy.com
Les indications, photographies, images ou schémas présents sur cette notice n'engagent pas la société SEWOSY et n'ont aucune valeur contractuelle
The informations, photographs, images, drawings contained in this leaflet does not engage the responsibility of SEWOSY and have no contractual value
Désignation
Déclencheur manuel 1 contact
Manual call point 1 contact
Déclencheur manuel 2 contacts
Manual call point 2 contacts
Déclencheur manuel 2 contacts et Buzzer / LED
Manual call point 2 contacts and Buzzer / LED
Déclencheur manuel 2 contacts avec détection d'ouverture du capot et Buzzer / LED
Manual call point 2 contacts with cover opening detection and Buzzer / LED
Capot de protection
Protection cover
x1
SHOK_C (SHOKV1 - V2 - V3)
SHOK_CA (SHOKV4)
Depuis la France : 0 891 89 95 97 (service 0,80€ / min + prix appel) -
KIT
Vis du capot pour pose
applique
Cover screw for
surface mounting
x1
K30x25
Vis + écrou pour pose
semi-encastrée
Cover screw and nut for
semi-flush mounting
x1
M3x16
M3
+
From abroad: +33 (0)3 90 59 02 20
Plomb plastique vert
Green plastic seal
x1
SHOK_P
1/4

Publicité

loading

Sommaire des Matières pour Sewosy SHOK Serie

  • Page 1 Les indications, photographies, images ou schémas présents sur cette notice n’engagent pas la société SEWOSY et n’ont aucune valeur contractuelle The informations, photographs, images, drawings contained in this leaflet does not engage the responsibility of SEWOSY and have no contractual value...
  • Page 2 MONTAGE - MOUNTING Montage semi-encastré / Semi-flush mounting Non fournies Not provided M3x16 Montage applique possible sur pot de 60 mm standard Montage applique / Surface mounting Surface mounting possible with standard 60 mm outlet box Non fournies Not provided K30x25 K30x25 Non fournies...
  • Page 3 RÉARMEMENT DU DÉCLENCHEUR MANUEL / MANUAL CALL POINT RESET OU / OR Réarmement par le dessous Réarmement en façade Reset below Front reset RANGEMENT DES CLÉS DE RÉARMEMENT / RESET KEY SLOTS 2 emplacements 2 slots RACCORDEMENT - CONNECTION Schéma du DM armé Connecting whilst switched on Schéma du DM désarmé...
  • Page 4 CONFIGURATIONS DU CAVALIER / JUMPER CONFIGURATIONS SHOKV3 Cavalier / Jumper ÉTAT DU BUZZER / STATE OF THE BUZZER Lors du déclenchement, le buzzer sonne en continu (ON - 70 dB) When triggered, the buzzer sounds continuously (ON - 70 dB) Buzzer inhibé...

Ce manuel est également adapté pour:

Shokv1Shokv2Shokv3Shokv4