Publicité
As long as the charging process continues, the LED of the controller is switched
on. When the charging process is complete, the status LED on the controller turns
off. Alternatively, you can check the battery level of controller on the connected
console.
Note: Once the battery is fully charged, the LED indicator stops flashing.
8. Dual vibration function
The Gamepad has two strong vibration motors. The controls are represented more
realistically with the vibration effect.
Note: Please note that the vibration works only if the game or the program sup-
ports this function and the corresponding feature has been enabled in the game
options.
9. Resetting the device
To reset the controller completely, press the "RESET" button on the back of the
device using a thin, pointed and long object. Insert this object through the small
opening in the back of the device. Once you insert the long object and press the
"RESET" switch, the device turns off and is reset.
10. LEDs
Press and hold the "LB+RB" buttons for about five seconds to switch off all of
the device's LEDs. If you want to switch the LEDs back on, repeat the process by
pressing the "LB+RB" buttons again for about five seconds.
11. Safety instructions and disclaimer
Please do not try to open the device to carry out repairs or modifications by
yourself. Avoid contact with the mains supply. The device does not carry current
only when disconnected. Please do not short-circuit the product.
The device is not approved for outdoor use. Therefore, please use it only in dry
surroundings. Protect it from high humidity, water and snow. Do not expose the
device to high temperatures.
12
English
Publicité
