Publicité
STEP 3
Install the Bed Slat (D) to Side Rail (E) & (F), and tighten with Screws (5) as shown.
(NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED
TO OBTAIN PERFECT STABILITY.)
Repeat Step 3 for other set of slats assembly.
Push the Side Rail (E) & (F) to meet with Wooden Slat (D) and fix the Screw (5) by
using the Screw Driver.
NOTE: TIGHTEN SCREWS PERIODCALLY AS SCREWS WILL
BECOME LOOSE WITH USE. CHECK TIGHTNESS OF ALL SCREW
EVERY 6-8 WEEKS.
06
24x
STEP 3.1 :
D
5
E
Publicité
