Publicité
● Next, attach the upright support bracket using the long bolts with washers and nuts. Secure fully.
● Carefully tilt the assembly over and screw in the floor levelers. Note: *If using the floor anchors install them
in between the 2 locking nuts as shown.
● Tilt the assembly back upright and install/insert the top upright section. The mounting holes will align on
the backside of the upright. Secure fully with the short bolts and washers.
● Insert the 4 end caps to complete the base frame.
●Install the holders of your storage rack with the long carriage bolts, at the locations that accommodate your
items. Foam pads can be used for extra protection. Repeat assembly for second storage holder.
*
Publicité
